79117 - Blue Lightning Flexible Aluminum / Zinc Anode Rods Outlet Fitting with Drainage Kit

Part # : 79117
Model : Blue Lightning Outlet Fitting Magnesium Residential Anode Rods
Drainage Kit

Category : Anode Rods
Quantity : Single Unit

Draingage Kit
Outlet / Nipple Fitting
Aluminum /Zinc Residential
Anode Rods

Blue Lightning Aluminum /Zinc Residential Flexible Anode Rod with Outlet Fitting and Drainage Kit

If you have smelly hot water this rod is for you!! The zinc in this anode rod is designed to combat odor that comes from your hot water tank. Often times when well water is used H2S builds up causing a rotten egg smell to come from your hot water. Zinc counteracts this natural process and eliminates the unwanted odor.

This is the Outlet Fitting model of the Blue Lightning Aluminium / Zinc Flexible Anode Rod combined with the Drainage Kit. This model has a length of 42 inches, a diameter of .75 inches, and 3/4-14 NPT thread size (This sizing should be standard for the bulk of residential water heaters). The rod is broken down into four separate segments. Each segment is Aluminium on a steel rod core and about 9 and a half inches long (except the last section). The segments are attached via copper or stainless steel couplers and 301 stainless steel braided wire. All of our Anode Rods are lead-free!

The Drainage kit comes with a Full Port Brass Valve that provides a 3/4 inch connection compatible with your average garden hose. This provides a method for easily draining your water heater annually to reduce sediment build-up. This valve also provides an opening large enough for a long narrow object to break up any hardened material that has collected at the bottom of the tank. The Full Port Valve comes with a watertight cap so that you can easily secure the connection when not in use.

Together these items can significantly extend the life span of your water heater by preventing damage to the interior of the tank. Our innovatively designed Blue Lightning Aluminium / Zinc Flexible Rod, also known as a sacrificial rod, is designed to attract the corrosive properties in your water heater tank and break down before the steel interior of the water heater through a process called electrolysis. In many cases, particularly when an aluminum anode rod was used previously, the rod slowly deteriorates and falls to the bottom of the water heater creating a destructive sludge. If this sludge is left unattended it can cause the drainage valve at the bottom of the water heater to become badly clogged and destroy the integrity of the appliance.

Any sludge should be broken up and flushed from the bottom of the tank annually along with an inspection of your Blue Lightning Aluminium / Zinc Anode Rod. In most cases, rod replacement should not take place for the first two years depending on the qualities of the water.

Designed by All Rights Reserved by The Plumber's Choice